front hatch vent riser HW

captfrank · Post by **captfrank** » Sun Aug 12, 2018 12:20 pm

I'm looking for the front hatch the little vent that is inside the hatch the riser arm I think you call it is totally frozen and parts also broke off. I want to get a new one anyone know where to get it?

Post by **dougl33** » Tue Aug 14, 2018 10:44 am

Frank, I'm pretty sure most of the hatch stuff came from Bomar.

captfrank · Post by **captfrank** » Tue Aug 14, 2018 2:07 pm

Thanks! I have bene looking and can't seem to find the part.

IRGuy · Post by **IRGuy** » Wed Aug 15, 2018 9:01 am

Doug is correct... Bomar made our hatches (I believe also the side ports). A couple of years ago the fwd hatch on my B33 leaked terribly. After learning that Bomar made them I gave them a call. They were very helpful, and they still have parts available to repair our hatches. Give them a call.

Post by **dougl33** » Wed Aug 15, 2018 12:56 pm

http://pompanettellc.com/bomar/

captfrank · Post by **captfrank** » Sun Aug 19, 2018 11:37 am

Thanks I sent them an email with pic. Hopefully they still have them

captfrank · Post by **captfrank** » Wed Aug 22, 2018 1:31 pm

FYI they said that is not their part

Post by **dougl33** » Thu Aug 23, 2018 5:41 am

Interesting. I know I got my parts from them. Check with Dany at Hightide Marine. Maybe the 35's had used a different supplier?

No Yacht Yet · Post by **No Yacht Yet** » Fri Aug 24, 2018 3:26 am

The hatches on the 33 are different from the 35,and the 42. If you find them I’m interested where. I see most guys replace with bomar similar to what’s on the 33’s. The ones on the 35 and 42 are nice because they give ventilation with out and rain coming in. I’m sure you could rebuild what you have.

captfrank · Post by **captfrank** » Wed Aug 29, 2018 12:47 pm

quote:Originally posted by No Yacht Yet The hatches on the 33 are different from the 35,and the 42. If you find them I’m interested where. I see most guys replace with bomar similar to what’s on the 33’s. The ones on the 35 and 42 are nice because they give ventilation with out and rain coming in. I’m sure you could rebuild what you have. Brian 1985 Bertram 42 SF Cummins QSC 600 HP Seahorse Ellisville Harbor, Ma It's that vent rise/HW that is broken so I can't close it in rough seas thus water in vbunk. But could chalk shut but like you said good for the ventilation

Rick · Post by **Rick** » Sat Sep 01, 2018 5:31 am

This is the one that fit mine: https://www.westmarine.com/buy/bomar--m ... ecordNum=3 Rick Ticket 85 SF Merc 454 MPI's Falmouth, MA

captfrank · Post by **captfrank** » Sat Apr 13, 2019 6:42 am

quote:Originally posted by Rick This is the one that fit mine: https://www.westmarine.com/buy/bomar--m ... ecordNum=3 Rick Ticket 85 SF Merc 454 MPI's Falmouth, MA I think thats the one that holds the main hatch not the vent