Love that Rejex!
Love that Rejex!
Regards, Doug L.
1986 33 Bertram FBC Cummins 6BTA's Queen Elizabeth
Marblehead, MA

1986 33 Bertram FBC Cummins 6BTA's Queen Elizabeth
Marblehead, MA

-
Aussie Syd
- Commander

- Posts: 125
- Joined: Fri Jan 27, 2006 7:55 pm
- Location: Australia
-
BECCA ROSE
- Commodore

- Posts: 1301
- Joined: Thu Feb 10, 2005 12:46 pm
- Location: USA
To bad that Power Plant is gonna shit all over it! Bill 1989 33 FBC Cummins 330B > ~------- [img]http://www.bertram33.com/photogallery/p ... a_Rose.jpg[/img]
Bill 1989 33 FBC Cummins 6BTA's ><)))))*> ~------- 

-
BECCA ROSE
- Commodore

- Posts: 1301
- Joined: Thu Feb 10, 2005 12:46 pm
- Location: USA
It does look good though, now get that boat in the water! Bill 1989 33 FBC Cummins 330B > ~------- [img]http://www.bertram33.com/photogallery/p ... a_Rose.jpg[/img]
Bill 1989 33 FBC Cummins 6BTA's ><)))))*> ~------- 

-
BECCA ROSE
- Commodore

- Posts: 1301
- Joined: Thu Feb 10, 2005 12:46 pm
- Location: USA
That's great! Bill 1989 33 FBC Cummins 330B > ~------- [img]http://www.bertram33.com/photogallery/p ... a_Rose.jpg[/img]
Bill 1989 33 FBC Cummins 6BTA's ><)))))*> ~------- 

Sean.. When Syd gets here I will turn him around and send him back to you! Doug.. She sure looks great! Makes me envious! Frank B - IRGuy@aol.com "Phoenix" 1983 FBC Wilmington, NC
Frank B - IRGuy@aol.com "Phoenix" 1983 FBC Cummins 6Bs - 315HP Wilmington, NC
-
No Yacht Yet
- Captain

- Posts: 260
- Joined: Thu Feb 15, 2007 1:32 am
- Location: USA
Wow... Doug, That looks great! I have been using Dupont Foam Pad Polishing Glaze then 1 coat of Liquid Colinite and then 2 coats of Colinite paste wax. Once a month I'm giving the topsides a quick go over,the hull looks good all year. Does the rejex last all season? Brian 1986 Bertram 33 FBC Mercruisers Seahorse Ellisville Harbor, Ma
Brian 1985 Bertram 42 SF Cummins QSC 600 HP Seahorse Ellisville Harbor, Ma
Yes. The rejex lasts all year. I put 2 coats on over a 2 day period. The boat looked better taking the shrink wrap off than 95% of the boats in my marina look when they're all waxed up. I put a couple of extra coats on the sides near the velocijet and on the transom. What I like about the rejex is that it doesn't let the black streaks get behind the wax and into the gel coat. You just wipe them right off. I've been using this stuff for 4 seasons now. I'll never use anything else. Back in 2005 I went over the whole hull with 3M's Finesse It II with a machine. Then I used a Machine Glaze from Meguires to seal the gel coat. Finally, I put 2 coats of rejex on by hand. Now I just wash the boat and apply the 2 coats of rejex by hand. It takes me 2 hours to do the entire hull (on and off).
Regards, Doug L.
1986 33 Bertram FBC Cummins 6BTA's Queen Elizabeth
Marblehead, MA

1986 33 Bertram FBC Cummins 6BTA's Queen Elizabeth
Marblehead, MA

As Doug knows, I started using ReJex last year above the rub rail. I'll swear by the stuff too. So Doug, I'm hauling on June 9 to do the bottom. You are more than welcome to come down and help me with doing Rejex below the rub rail. I'll buy....Oh question. I usually do a cleaner/wax and then apply the Starbrite Teflon. Do you usually do the cleaner/wax and apply Rejex? I found after you use it once, it is basically a reapplicaton of Rejex. Gene Dugan Boca Raton, Fl. "Nauti Marie" 1989 33 FBC
Gene Dugan Boca Raton, Fl. "Nauti Marie" 1989 33 FBC 2007 8.1 Crusaders SOLD 2000 Pursuit 2870 Offshore Twin 2016 Suzuki 200s

